Hayward Poolvergnuegen Troubleshooting

The Hayward Poolvergnuegen The PoolCleaner 2 Wheel does not move

Solution:

• The pump may be turned off.
• The pump may not be primed. Check for leaks in the system(symptoms — bubbles from the returns ?)
• Problem or obstruction in the system
• Filter needs backwashing . Clean pump basket.
• Pump impeller may be blocked
• Obstruction  in the PoolCleaner itself

The Hayward Poolvergnuegen The PoolCleaner 2 Wheel moves to slow

Solution:

• Problem or obstruction  in the system.
• Obstruction in the PoolCleaner itself
• Low wheel RPM (insufficient flow).

The Hayward Poolvergnuegen The PoolCleaner 2 Wheel right wheel will not turn when rotated by hand.

Solution:

• Obstruction in the PoolCleaner itself

The Hayward Poolvergnuegen The PoolCleaner 2 Wheel loops in the hoses won’t come out

Solution:

• The hoses have been stored in a coiled position. Lay them straight in the sunlight
• Clean swivel on cleaner head by running it under a tap

The Hayward Poolvergnuegen The PoolCleaner 2 Wheel does not clean  the entire pool

Solution:

• The hose is to short
• The float(s) may be in the wrong position
• The Hose Cone Swivel (on the turbine cover) may be dirty Clean it.
• The return fittings may be pushing the PoolCleaner hoses away. Point them down.
• Low wheel RPM (insufficient flow)

The Hayward Poolvergnuegen The PoolCleaner 2 Wheel climbs the wall too much or climbs out.

Solution:

• The tire treads and skirts may be worn down
• Too much suction or flow
• You are not using the Adjustrable Regular Valve

The Hayward Poolvergnuegen The PoolCleaner 2 Wheel won’t climb the wall

Solution:

• The float(s) may be in the wrong position
• The hose is too short
• The return fitting may be pushing the Poolcleaner hoses away. Point them down.